Arduino microcontroller system Here’s how to get ready to work with the Arduino microcontroller system. Arduino is a microcontroller’s development board that very famous now.. Many people search information about arduino ,arduino projects ,arduino uno ,arduino wifi ,arduino due ,arduino shields ,arduino mega ,arduino tutorial ,arduino labview or arduino motor shield. I will sharing an [...]
Sponsored Link :
Article2
Personal Computers Based vs PIC micro MCU Based Program Development
Engineers starting development on PC based products have the luxury of basic hardware pre-wired (i.e., keyboard, processor, memory, I/O, printer and visual display (screen)). The product development then comes down to writing the software and debugging the errors. Those embarking on a PIC based design have to create all the interfaces to the outside world [...]
Article3
PIC16 Microcontrollers
? MCU features ? Program execution ? RAM file registers ? Other PIC chips The microcontroller unit (MCU) is now big, or rather small, in electronics. It is one of the most significant developments in the continuing miniaturization of electronic hardware. Now, even trivial products, such as a musical birthday card or electronic price tag, [...]
Article4
What Is an Embedded System?
An embedded system is a combination of computer hardware and software, and perhaps additional mechanical or other parts, designed to perform a specific function. A good example is the microwave oven. Almost every household has one, and tens of millions of them are used every day, but very few people realize that a processor and [...]
Article5
image proccessing sensor
• Micron DigitalClarityTM CMOS imaging technology • Array Format (5:4): 1,280H x 1,024V (1,310,720 active pixels). Total (incl. dark pixels): 1,312H x 1,048V (1,374,976 pixels) • Frame Rate: 30 fps progressive scan; programmable • Shutter: Electronic Rolling Shutter (ERS) • Window Size: SXGA; programmable to any smaller format (VGA, QVGA, CIF, QCIF, etc.) • Programmable [...]
Article6
atmel microcontroller : Serial Peripheral Interface
The ATmega16 SPI also provides for two-way serial communication between a transmitter and a receiver. In the SPI system, the transmitter and receiver share a common clock source. This requires an additional clock line between the transmitter and receiver but allows for higher data transmission rates as compared with the USART. The SPI system allows [...]
Article7
how to use interupts
When receiving data and change in status from I/O Ports, we have two methods available to us. We can Poll the port, which involves reading the status of the port at fixed intervals to determine whether any data has been received or a change of status has occurred. If so, then we can branch to [...]
Article8
USB162 module
The USB162 from Atmel is great new chip with USB device support. The only downside for most hobbyists will be that it is not available in DIP format. MCS Electronics created a small converter board with normal pins with the size of a 28 pin DIP chip. Keyword :wireless ,search ,project ,platine ,networking ,microsin,software ,microcontroller [...]
Article9
The USB Controller
The AN2131SC single-chip microcontroller contains an 8051 processor core and a full-speed USB interface. The microcontroller has 8 KB of RAM, three counter/timers, two serial interfaces and interrupt inputs. A total of 18 freely programmable I/O pins are available. A serial EEPROM can be connected to act as program memory, or the IC can be [...]
Article10
Basic circuit for USB developers
Cypress makes our standard USB controller, the AN2131SC. The specifications of this microcontroller are provided in Table , and its data sheet can be downloaded from the Web at www.cypress.com/cfuploads/ img/products/AN2131SC.pdf. As can be seen from here, besides the USB microcontroller the USB connector is the second special component of the basic circuit. There are [...]
arm microcontroller11
What’s an Embedded System?
There is no formal definition of an embedded system, but it is generally accepted to be dedicated computer hardware with software designed to solve a specific problem or task. This is in contrast to a general-purpose computer, such as a personal computer (PC) or workstation, designed to run any software application programmers create and users [...]
Article12
Using JTAG Boundary Scan Interface
This application note explains the XC9500™/XL/XV Boundary Scan interface and demonstrates the software available for programming and testing XC9500/XL/XV CPLDs. An appendix summarizes the iMPACT software operations and provides an overview of the additional operations supported by XC9500/XL/XV CPLDs for in-system programming. IEEE Boundary Scan Standard 1149.1, also known as JTAG, is a testing standard [...]
